•
Firmware upgrade
•
Storing and uploading configuration settings
•
Shutting down the device
Click the System icon on the Menu toolbar to access the System screen.
Figure 46: System screen
System time and date
Configure the TVR 20 system date and time in the Date/Time screen. This
screen also lets you enable Daylight Savings Time (DST) and format the date
and time displayed on-screen.
To configure the system date and time:
1. In the Menu toolbar click the System icon to display the System setup screen.
2. Select the Date/Time subscreen.
3. Enter the current date in the Date box.
4. Enter the current time in the Time box.
5. Select a date format in the Date Format box.
6. Select a time format in the Time Format box.
7. Enable or disable the network time protocol (NTP). NTP is a protocol to
synchronize the clocks of computers over a network.
8. If NTP option is enabled, enter an NTP server address such as:
server 0.europe.pool.ntp.org
9. Select your time zone in the Time Zone box.
TruVision DVR 20 User Manual
53BChapter 6: Advanced setup
95