Camera Recording Settings - Interlogix TruVision User Manual

Chapter 10: Camera setup
To automatically add an IP camera:
1. From the menu toolbar, click
2. Click Device Search/Add
recorder LAN.
3. Check the boxes of the cameras that you want to add to the recorder.
4. Click Add to add the selected cameras to the list of devices in the recorder. Click
Done when complete in order to return to the main window.
The cameras are added to the end of the list of devices.
5. To test if a camera connection is operational, select the desired camera from the list
of devices connected to the recorder and click Live. A pop-up window should
appear showing the camera's live view.
Note: If cameras still have default settings, they might have the same IP addresses.
This creates an IP conflict. Use the Edit button to assign a different IP address to
each camera. Ensure that for each camera to successfully connect the cameras.
To manually add an IP camera:
1. From the menu toolbar, click
2. Click Manual Add. In the pop-up window, enter the camera details such as the IP
camera address/domain, protocol, management port, user name and password.
Click OK.
The camera is added to the end of the list of devices.
Note: Only one camera can be manually added at a time.

Camera recording settings

Ensure that the HDD has been installed and initialized before configuring the recording
settings. See chapter "Storage management" on page 104 for more information.
62
Camera Setup >
to search for any supported IP cameras located in the
Camera Setup >
IP Camera Status.
IP Camera Status.
TruVision DVR 12HD User Manual