Controlling A Ptz Camera - Interlogix TruVision DVR 20 User Manual

52BChapter 5: Basic operation
Sequencing live mode
The sequencing feature allows a camera to be displayed briefly on-screen before
advancing to the next camera in the sequence list. Sequencing can only be done
in full screen mode.
Each camera on the main and spot monitors can have a pre-programmed dwell
time and sequence order. See "Sequencing main and spot monitors" on page 91
for the setup information. The default sequence list displays each camera in
numerical order.
Sequencing live mode using the mouse:
1. Select the camera where you want to start sequencing.
2. Right-click the mouse. The Main toolbar appears on-screen.
3. Click the Sequence icon. The sequencing starts.
4. Press the icon again to stop the sequencing.
Sequencing live mode using the front panel:
1. Select the camera where you want to start sequencing.
2. Press the LIVE button on the front panel. The sequencing starts.
3. Press the LIVE button again to stop the sequencing.
Digital zoom
You can easily zoom in or out of a camera image using the digital zoom function.
The zoom function doubles the size of the camera image. This function is only
available from the front panel.
Note: You must be in live mode.
To quickly zoom in/out on a camera image:
1. Select the camera you wish to use.
The Main toolbar must be closed.
Note:
2. Press the camera number button twice on the front panel for the selected
camera. The word "Zoom" appears on-screen.
3. Using the arrow buttons move the camera image around on-screen.
4. To exit digital zoom, press the MENU button and return to live mode.

Controlling a PTZ camera

The PTZ control interface lets you control the PTZ operation of the cameras
within the TVR 20 user interface. You can control PTZ cameras using the buttons
on the front panel, the KTD-405 keypad, and remote control as well as using the
42 TruVision DVR 20 User Manual