Interlogix TruVision DVR 20 User Manual page 15

Connecting a TVR 20 to a PTZ dome camera
Use the input/output box that is supplied with the KTD-405 keypad to connect
both a PTZ dome camera and a keypad to the TVR 20. See Figure 5 below.
Figure 5: Connecting a TVR 20 to a PTZ dome camera
Configuring the PTZ protocols for Interlogix cameras
Before the PTZ cameras are assembled in their housings, set their protocol and
address DIP switches for the TVR 20. See Table 5 below for different Interlogix
PTZ camera settings.
If you are using PTZ cameras from another company, please refer to their
configuration instructions.
Table 5: PTZ protocols for Interlogix cameras
Camera Switch setting
TruVision Mini PTZ Protocol DIP
12X: Indoor Dome switches
RS-485
communication DIP
switches
Camera site ID DIP
switches
TruVision DVR 20 User Manual
000000
0000000000
Select the
camera ID
DIP switch
address as
required.
1. Protocol DIP switches;
2. RS-485 communication DIP
switches;
3. Camera site ID DIP switches
49BChapter 2: Installation
11