Interlogix TruVision DVR 20 User Manual page 24

50BChapter 3: eZ setup
2. Enter the setup values:
Option
Date
Time
Dual stream
Resolution
Frame rate
Record preset
Network Type
IP Address
Subnet Mask
20
Description
Using the pop-up calendar, enter the current date and click
the Done button.
Using the pop-up clock, set the time of the DVR. See the
System menu to change time format.
Select dual or single stream.
Select the recording resolution depending on the video
format.
 NTSC: 704 x 480 (4CIF)/ 704 x 240 (2CIF)/ 352 x 240
(CIF) / 176 x 120 (QCIF, B stream only)
 PAL: 704 x 576 / 704 x 288 / 352 x 288 / 176 x 144 (QCIF,
B stream only)
Set the frame rate. The frame rate values available are:
Full, 25 fps PAL (30 fps NTSC), 20, 16, 12, 10, 8, 6
(default), 4, 2, 1, 1/2, 1/4, 1/8, 1/16. Real time is 25 fps PAL
(30 fps NTSC).
Select a value.
Select the number of days that the video can be recorded
before being overwritten. Maximum number of days is 60.
Select one of the three options from the drop-down list.
 Static IP: Set a fixed IP for the network.
 DHCP: The DHCP server in the LAN will automatically
assign an IP for the network connection.
 PPPoE: Set a dynamic IP for the network.
Specifies the current IP address for the DVR. A Fixed IP
address must be set manually.
If DHCP or PPPoE has been selected, this value will be
assigned automatically.
Specifies the subnet mask for your network so that the DVR
is recognized within the network.
If DHCP or PPPoE has been selected, this value will be
assigned automatically. Default value is 255.255.255.0.
TruVision DVR 20 User Manual