Using The Remote Control - Interlogix TruVision DVR 20 User Manual

USB mouse lets you navigate and make changes to settings in the user
interface.
Connect the mouse to the TVR 20 by plugging the mouse USB connector into
the USB port on the front panel. The mouse is immediately operational and the
pointer should appear. The recommended mouse types are Logitech® and
Microsoft® wired USB wheel-mouse. The DVR does not support the wireless
USB mouse.
Move the pointer to a command, option, or button on a screen. Left-click the
mouse to confirm a selection.
To use the mouse in live mode:
1. Scroll forward and backward between cameras.
When in multiscreen mode, use the scroll button on the mouse to scroll
forward and backward through the cameras.
2. Double-click to toggle between full-screen and multiview.
When in multiview, double-click a camera to display its image in full-screen
view. Double-click again to return to multiview.

Using the remote control

The TVR 20 is supplied with an infra red (IR) remote control unit. Like the mouse,
it can be used to operate all of the main functions of the TVR 20.
The remote control can be programmed with a unique address so that the
controller will only be able to communicate with DVRs with that address. No
programming is necessary if using a single TVR 20. See "Audio, remote control,
language settings and playback replay time" on page 97 for information on
setting up the remote control ID so that the DVR recognizes it.
TruVision DVR 20 User Manual
51BChapter 4: Operating instructions
27