Interlogix TruVision DVR 20 User Manual page 52

52BChapter 5: Basic operation
Selecting more than one camera for playback
Note: You must be in multiscreen mode.
Cameras individually selected for playback:
All cameras selected for playback:
Instant replay of recorded video
Use the Playback toolbar to quickly locate video recorded in the past week to
playback. The playback images can be seen on-screen as you scroll the
playback time bar.
To instantly replay recorded video using the mouse:
1. Select the camera or cameras required.
2. Right-click the mouse to display the Main toolbar and click the Playback icon.
The Playback toolbar appears. The playback status icon also appears in the
selected camera display.
48
Select a camera and enter into
playback mode. The playback icon
appears on the camera display.
Repeat for each camera you want in
simultaneous playback.
In this example, cameras 2 and 3 are in
simultaneous playback.
Using the left or right arrow keys on the
front panel, scroll through each camera
individually to highlight it. When you
reach the end of the multiscreen group
the next camera selection will highlight
all cameras. Thick green frames
surround all the camera cameos and
the Playback icon appears on-screen
for every camera.
In this four-screen example, the fifth
time the arrow key was pressed
selected all cameras for simultaneous
playback. Press the arrow button again
to select one camera.
TruVision DVR 20 User Manual