3. Click
Apply
to save the settings and then click
Automatically allocating PoE power
The recorder can be set up to automatically allocate PoE power depending on each
camera's needs. Note that if the full PoE budget (120/200W) is used on the first seven
ports, for example, PoE port 8 will no longer be powered.
To set up auto PoE:
1. From the menu toolbar, click
2. Check
Auto
PoE.
3 Click
Apply
to save the settings and then click
recording settings
The camera recording settings allow you to define the configuration per camera per
stream recording mode.
Camera recording settings
The camera recording settings allow you to define the configuration per camera per
stream recording mode.
To configure recording settings:
1. From the menu toolbar, click
2. Select the camera you want to configure.
TruVision NVR 21 (SP) User Manual
Back
Camera Management
Back
Camera Recording
Chapter 10: Camera setup
to return to live view.
>
Camera
>
PoE
to return to live view.Camera
Settings.
Setup.
59