Interlogix TruVision DVR 20 User Manual page 89

Figure 43: Network setup screen (LAN submenu shown)
To define network settings:
1. In the Menu toolbar click the Network icon. The LAN submenu screen
appears.
2. Enter the following information:
Option
Network Type
IP
Subnet Mask
Gateway
TruVision DVR 20 User Manual
Description
Select one of the four options:
DHCP: The DHCP (Dynamic Host Configuration Protocol) server
in the LAN will automatically assign an IP for network connection.
Static: Select if using a fixed IP address for network connection.
PPPoE: Only select this option if using a direct connection to the
DSL. Verify with your ISP if they use PPPoE.
Off: Select if not using a network connection.
This field shows the DVR's current IP address.
If using a static IP address, enter the IP value. If DHCP or PPPoE
is selected as network type, this value will be assigned
automatically.
This field shows the subnet mask for your network so the DVR will
be recognized within the network.
If using a static IP address, enter the subnet mask value. If DHCP
or PPPoE is selected as network type, this value will be assigned
automatically.
This field shows the gateway for your network so the DVR will be
recognized within the network.
If using a static IP address, enter the gateway value. If DHCP or
PPPoE is selected as network type, this value will be assigned
automatically.
53BChapter 6: Advanced setup
85