Interlogix TruVision DVR 20 User Manual page 80

53BChapter 6: Advanced setup
Figure 38: System Notify screen
Table 19: System notification
Alarm events
Network loss
HD failure
Temperature
Fan failure
Power up
User lockout
Record failure
To select the alarm event
For each alarm event type select which type of response is required (buzzer,
email, and/or remote) and the output alarm to be activated.
Group alarms
Use this menu to associate several cameras to one alarm output. When one
camera in the group is triggered by an alarm, all the other cameras in the group
are then also triggered to record the alarm.
76
Description
If the network connection is lost, this will activate a network
failure event.
If the hard drive temperature goes above the safety limit, this
will activate a HD failure event.
If the hard drive temperature is to high, this will activate a
temperature failure event.
The internal fans of the DVR are equipped with rotation
detectors. Any fault with the fan will activate a fan failure event.
If the unit looses power, this will activate a Power Up failure
event.
Three repeated login failures locks the unit for 30 minutes and
sends a notification.
If the recording unexpectedly stops, this will activate a record
failure event.
Note: When an alarm output is assigned to Record Failure, any
other events assigned to this output will automatically be
changed to "None".
TruVision DVR 20 User Manual