Using The Mouse; Using The Ir Remote Control - Interlogix TruVision DVR 12 User Manual

Using the mouse

The USB mouse provided with the recorder can be used to operate all the
functions of the recorder, unlike the front panel which has limited functionality.
The USB mouse lets you navigate and make changes to settings in the user
interface.
Connect the mouse to the recorder by plugging the mouse USB connector into
the USB port on the back panel or the front panel. The mouse is immediately
operational and the pointer should appear.
Note: Use a USB 2.0 or higher mouse.
Move the pointer to a command, option, or button on a window. Click the left
mouse button to enter or confirm a selection.
You can purchase a spare mouse by ordering part number TVR-MOUSE-1.
See Table 5 below for a description of the mouse buttons.
Table 5: Mouse buttons
Item Description
Left button Single-Click
Double-Click
Click and Drag
Right button Single-Click
Scroll-wheel Scroll Up
Scroll Down

Using the IR remote control

The recorder is supplied with an infra red (IR) remote control unit. Like the
mouse, it can be used to operate all of the main functions of the unit.
TruVision DVR 12 User Manual
Live view: Select a camera to display the quick
access toolbar (see "Accessing frequently used
commands" on page 69).
Menu: Select a component of a menu, such as a
button or an input field. This is similar to pressing the
Enter button on the remote/front panel controls.
Live view: Switch between single screen and multi-
screen mode in live/ playback mode.
Live view: Drag channel/time bar.
PTZ control: Adjust pan, tilt and zoom.
Tamper-proof, privacy masking and motion
detection functions: Select the target area.
Digital zoom-in: Drag and select target area.
Live view: Display menu.
Menu: Exit the current menu and return to higher
level.
Live view: Return to the previous window.
Menu: Move the selection to the previous item.
Live view: Move to the next window.
Menu: Move the selection to the next item.
59