Using The Ir Remote Control - Interlogix TruVision DVR 12HD User Manual

Using the IR remote control

The recorder is supplied with an infrared (IR) remote control unit. Like the mouse, it can
be used to operate all of the main functions of the unit.
The IR remote control can be programmed with a unique device ID address so that the
controller will only be able to communicate with recorders with that address. No
programming is necessary if using a single recorder.
The device ID address only applies when using a remote control and not when using a
keypad.
You can purchase a replacement remote control by ordering part number TVR-
REMOTE-1.
Figure 4: IR remote control
Item
1. Alarm
2. Device
3. Numeric buttons
4. Display
5. Mon A and Mon B Switch between monitors A and B.
6. Live
TruVision DVR 12HD User Manual
Description
Acknowledge an alarm.
Enable/disable the IR remote control to control the recorder.
Select a camera, and enter a number in a menu option.
Switch between the different multiview formats.
Return to live view mode.
Chapter 4: Operating instructions
23