Fit To Paper - Konica Minolta Pi3505e User Manual

Configuring PostScript Printer Driver Properties for Windows 98 and Me
(1) Printer features
The following are the settings that can be configured in the
features
list, click the
select the setting you want from the list that appears.
I Fit to Paper
I Job Life
I Password 1-4
Printer Controller Pi3505e Pi3505e/PS
group. To configure settings, first select the item in the
Change setting for
Select the paper size to which you want to fit the print image.
Available Off, Letter, Legal, Executive, A3, A4, A5, A6,
settings: JIS B4, JIS B5, JIS B6, Invoice, Ledger,
11 × 14, FLS (203 × 330mm), FLS (210 ×
330mm), FLS (216 × 330mm), FLS (220 ×
330mm)
Specify whether a print job should be locked, stored to the hard
disk, or reprinted after printing is complete.
Available Delete after Printing, Lock Job, Store to HDD,
settings: Reprint
Note
Store to HDD can be selected only when the Hard Disk
Drive Kit (HDD-6) is installed on the machine.
If you select Lock Job
password you want assign to the locked job, in the range of
0000 to 9999 (4 digits).
A locked printing job will be printed after it is unlocked using the
Job List screen on the machine's control panel. Note that the
machine operator must be able to input the password when
unlocking the job.
Available 0 – 9
settings:
(Example) To specify the password "1234", you would input the
following.
Password 1: 1
Password 2: 2
Password 3: 3
Password 4: 4
down arrow button, and then
for Job Life, specify the 4-digit
6
Printer
6-3