Table of Contents
Advertisement
10
10.4
Access Lock Caused by Unauthorized Access
If the "Access Lock" function is set to "On" access is denied after three
incorrect attempts to access a Lock Job, even if the correct password is
finally entered.
For more details on the "Access Lock" function, refer to the Advanced
Operations volume of the copier's User Manual.
Allowing a Lock Job to be accessed again
1
On the machine's contral panel, press the [Utility] key.
2
Touch [Admin. Management].
3
Input the Administrator code, and then touch [Enter].
4
Touch [Admin. 2].
5
Touch [Unlock].
6
Select [Lock Job], and then touch [Enter].
10-12
Using the Touch Panel to Configure Printer Settings
Printer Controller Pi3505e Pi3505e/PS
Advertisement
Table of Contents
