Konica Minolta Pi3505e User Manual page 144

Configuring PostScript Printer Driver Properties for Windows NT 4.0
I Watermark
I Watermark String
I Watermark Font Typeface
I Watermark Font Size
I Watermark Angle
I Watermark Font Shading
I Watermark Position (Horizontal)
I Watermark Position (Vertical)
Printer Controller Pi3505e Pi3505e/PS
Specify where the watermark should be printed in the
document.
• Off Watermark is not printed.
• 1st Page Prints the watermark on the first page only.
Only
• All Pages Prints the watermark on all the pages of the
document.
Select the text string that you want to use as the watermark.
Available CONFIDENTIAL, TOP SECRET, COPY, DO
settings: NOT COPY, DRAFT, FINAL, PROOF
Select the typeface you want to use for the watermark. Any of
the fonts that are resident on your machine can be used.
Select a font size in the range of 8 points to 200 points.
Use this setting to specify the angle of the watermark text
relative to the paper, in the range of -90° to +90° (15-degree
steps). A negative (-) value rotates the characters clockwise, 0
specifies the text should be parallel to the paper, and a positive
(+) value rotates the characters counter-clockwise.
Specify the relative density of the watermark text, in the range
of 5% to 100% (10% steps)
Specify the horizontal position of the watermark as a value
from -999 (left) to +999 (right). Specifying a value of 0 positions
the watermark in the horizontal center.
Specify the vertical position of the watermark as a value from
-999 (left) to +999 (right). Specifying a value of 0 positions the
watermark in the vertical center.
7
7-11