Table of Contents
Advertisement
Configuring PCL Printer Driver Properties for Windows
(2) Interleaving Paper
OHP interleaving inserts sheets of paper (interleaving sheets)
between overhead projector transparencies when you are printing
on overhead projector transparencies.
• OHP Interleaving Select this check box when you want to turn
• OHP Interleaving
Paper Source
Printer Controller Pi3505e Pi3505e/PS
on OHP interleaving.
Click the down arrow button and select the
source tray of the interleaving paper.
Available settings:
Manual Feed, Tray 1, Tray 2, Tray 3, Tray 4,
LCC
Note
Always specify "1" for the number of copies when using OHP
interleaving.
You cannot specify the same source for both
the
Setup
tab and
box.
You cannot use OHP interleaving and two-sided printing at the
same time.
Tip
The overhead projector transparencies tray is indicated green
in the Printer Figure image.
Interleaving Paper Source
4
Paper Source
on
on this dialog
4-13
Advertisement
Table of Contents
