Konica Minolta Pi3505e User Manual page 27

2
6
When the
driver CD-ROM that comes with the controller into the CD-ROM drive
of your computer.
7
Click the
printer driver that matches the operating system your computer is
running, and then click the
8
On the list of printers that appears, select the driver you want to install,
and click the
9
On the port selection screen that appears. Select "USB001" if the
connection is made through the USB cable and "LPT1" if the
connection is made through the IEEE1284 cable. Then, click the
[Next] button.
Note
For information about connecting to a network, see "Network
Settings" on page 3-1.
10
On the next screen that appears, check the name of the printer. If you
want to designate this printer as the default printer, select Yes. Finally,
click the
This displays a screen that asks if you want to print a test page.
11
Select
❍
If you elect not to print a test page, select No.
2-4
Install From Disk
Browse button, select the file that corresponds to the of
Next button.
Next button.
Yes (recommended)
Installing a Windows Printer Driver
screen appears, place the controller
OK button.
to print a test page.
Printer Controller Pi3505e Pi3505e/PS