Table of Contents
Advertisement
8
(5) Output Setting
This settings controls the tray to which printed sheets are be
output. The setting you can select here depends on the type of
finisher currently installed on the machine.
This setting is available only when the Build-in Finisher (FN-117)
and the Mail Bin Kit (MK-1) are installed on the machine.
Available
settings:
8-36
Default, Bin1, Bin2, Bin3, Bin4
Note
Some options are not available when certain paper sizes are
selected. For more information, see the machine's user
documentation.
When printing on thick paper and other special paper, the
output may sometimes fail to be distributed to the output
destination you specify.
Tip
Finisher options can be configured using the
Options
list (p. 8-21).
Printer Driver for Macintosh
Printer Controller Pi3505e Pi3505e/PS
Installable
Advertisement
Table of Contents
