Connecting Directly To A Computer With A Usb Cable; Connecting To A Network With A Lan Cable - Konica Minolta Pi3505e User Manual

Before Using the Printer Driver

Connecting directly to a computer with a USB cable

1
Find the machine's USB port.
❍
The USB port is located on the back of the machine.
2
Plug one end of the USB cable into the machine's USB port.
3
Install a printer driver on your computer.
❍ See "Installing a Windows Printer Driver" on page 2-1.
4
Connect the other end of the USB cable to the computer's USB port.
❍ See the documentation that came with your computer for
information about where its USB port is located.
Important!
Make sure you install the printer driver before you connect the USB
cable to the computer.

Connecting to a network with a LAN cable

Note
Use Fast Ethernet 100BASE-TX (Category 5) cable for a LAN
connection.
To use the machine on a network, you also need to configure network
settings for the machine and computer. For details, see "Network
Settings" on page 3-1.
1
Find the machine's LAN port.
❍
The LAN port is located on the back of the machine.
2
Plug one end of the LAN cable into the machine's LAN port.
3
Plug the other end of the LAN cable into a LAN hub.
Printer Controller Pi3505e Pi3505e/PS
1
1-9