Konica Minolta Pi3505e User Manual page 118

Configuring PostScript Printer Driver Properties for Windows 2000 and XP
I
Watermark String
Select the text string that you want to use as the watermark.
Available
settings:
I
Watermark Font Typeface
Select the typeface you want to use for the watermark. Any of the
fonts that are resident on your machine can be used.
I
Watermark Font Size
Select a font size in the range of 8 points to 200 points.
I
Watermark Angle
Use this setting to specify the angle of the watermark text relative
to the paper, in the range of -90° to +90° (15-degree steps). A
negative (-) value rotates the characters clockwise, 0 specifies the
text should be parallel to the paper, and a positive (+) value rotates
the characters counter-clockwise.
I
Watermark Font Shading
Specify the relative density of the watermark text, in the range of
5% to 100% (10% steps).
I
Watermark Position (Horizontal)
Specify the horizontal position of the watermark as a value from
-999 (left) to +999 (right). Specifying a value of 0 positions the
watermark in the horizontal center.
I
Watermark Position (Vertical)
Specify the vertical position of the watermark as a value from -999
(left) to +999 (right). Specifying a value of 0 positions the
watermark in the vertical center.
Printer Controller Pi3505e Pi3505e/PS
CONFIDENTIAL, TOP SECRET, COPY, DO
NOT COPY, DRAFT, FINAL, PROOF
5
5-15