Configure Wireless Intrusion Detection And Prevention Mail Settings - NETGEAR ProSafe Premium WNDAP660 Reference Manual

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
3. Specify the detection policy by making a selection from the IDS/IPS Detection Policy
drop-down list:
• Mild. The wireless access point scans for attacks every 10 seconds.
• Moderate. The wireless access point scans for attacks every 5 seconds. This is the
default setting.
• Aggressive. The wireless access point scans for attacks every second.
4. Optional: Click a policy name to display the policy rules that are stated next to the policy in
the table. IDS/IPS policy rules are not configurable.
5. Optional: Clear check boxes for policies that you want to disable. By default, the check box
next to Select Policy in the table heading is selected, and all IDS/IPS policies are enabled.
6. Click Apply to save your settings.
Configure Wireless Intrusion Detection and Prevention Mail
Settings
For the IDS/IPS to send a notification according to the policy rule, you need to configure the email
settings.

To configure IDS/IPS email settings:
1. Select Configuration > IDS/IPS Mail Settings. The IDS/IPS Mail Settings screen
displays:
Figure 55.
2. Configure the settings as explained in the following table.
Table 25. IDS/IPS mail settings
Setting
Show as Mail Sender
SMTP Server
Description
A descriptive name of the sender for email identification purposes. For
example, enter WNAP620-IDS-IPS@company.com.
The IP address or Internet name of the outgoing email SMTP server of your
ISP.
Management and Monitoring
95