NETGEAR ProSafe Premium WNDAP660 Reference Manual page 115

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
5. Specify a classification for the QoS policy as explained in the following table.
Note: Depending on your selection from the Match Frame Fields drop-down
list, Match Classifications appears either as a drop-down list from which you
need to make a selection or a field in which you need to enter information.
Table 33. QoS classification settings
Setting Description
Match Frame IP DCSP
Fields and Match
Classifications
IP Precedence From the Match Classifications drop-down list, select the DSCP
IP Protocol119
From the Match Classifications drop-down list, select the DSCP traffic
class against which the information in the IP header needs to be
matched:
• Routine(0)
• Priority(1)
• Immediate(2)
• Flash(3)
• Flash Override(4)
• Critic/CCP(5)
• Inter Control(6)
• Network Control(7)
marking against which the information in the IP header needs to be
matched:
• Best Effort
• Assured Forwarding - Class 1 Low
• Assured Forwarding - Class 1 Medium
• Assured Forwarding - Class 1 High
• Assured Forwarding - Class 2 Low
• Assured Forwarding - Class 2 Medium
• Assured Forwarding - Class 2 High
• Assured Forwarding - Class 3 Low
• Assured Forwarding - Class 3 Medium
• Assured Forwarding - Class 3 High
• Assured Forwarding - Class 4 Low
• Assured Forwarding - Class 4 Medium
• Assured Forwarding - Class 4 High
• Class Selector 1
• Class Selector 2
• Class Selector 3
• Class Selector 4
• Class Selector 5
• Class Selector 6
• Class Selector 7
• Expedited Forwarding
Traffic is matched against value 119 in the IP protocol field in the IP
header.
Advanced Configuration
115