NETGEAR ProSafe Premium WNDAP660 Reference Manual page 124

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Figure 71.
b. Optional: To display the Bridging screen for the 802.11a/na modes, click the 802.11a/na
tab.
c. Select the Enable Wireless Bridging check box. The Local MAC Address field is a
nonconfigurable field that shows the MAC address of the wireless access point.
d. Select the Wireless Point-to-Multi-Point Bridge radio button. The screen adjusts.
e. The profile table shows four security profiles. Choose a security profile to edit by
selecting the corresponding radio button to the left of the profile.
f. Click Edit to configure the selected security profile settings. The Edit Security Profile
screen displays for the selected security profile. (The following figure contains an
example.)
Figure 72.
Advanced Configuration
124