NETGEAR ProSafe Premium WNDAP660 Reference Manual page 52

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Table 10. Profile authentication settings (continued)
Setting
Network Authentication
and Data Encryption
(continued)
Wireless Client Security
Separation
VLAN ID
6. Optional: In the QoS Policies section of the screen, select a QoS policy from the Incoming
drop-down list, Outgoing drop-down list, or both. Depending on your selection, the policy is
applied to incoming packets, outgoing packets, or both incoming and outgoing packets, and
is displayed in the Policy Details fields.
Note: To be able to select a QoS policy, you first need to have configured one
or more policies (see
7. Click Apply to save your settings.
Description
WPA & WPA2 with Configure the RADIUS server setting. TKIP + AES
Radius encryption is the default encryption.
See Configure WPA with RADIUS, WPA2 with RADIUS,
and WPA & WPA2 with RADIUS
Note:
WPA with TKIP or WPA2 with AES.
WPA-PSK Enter a WPA passphrase and select TKIP or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
WPA2-PSK Enter a WPA passphrase and select AES or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Note:
WPA-PSK & Enter a WPA passphrase. TKIP + AES encryption is the
WPA2-PSK default encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Note:
WPA with TKIP or WPA2 with AES.
If you enable wireless client security separation by selecting Enable from the
drop-down list, the associated wireless clients cannot communicate with each
other. By default, Disable is selected from the drop-down list. This feature is
intended for hotspots and other public access situations.
Enter the VLAN ID to be associated with this wireless security profile. The
default VLAN ID is 1. The VLAN ID needs to match the VLAN ID that is used by
the other devices in your network.
Configure Quality of Service Policies
Wireless Configuration and Security
52
on page 55.
This setting allows clients to connect through either
on page 56.
on page 56.
Select this setting only if all clients support WPA2.
on page 56.
This setting allows clients to connect through either
on page 113).