NETGEAR ProSafe Premium WNDAP660 Reference Manual page 121

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
e. If you want to enable wireless client association while the wireless access point
functions as a point-to-point bridge, select the Enable Wireless Client Association
check box.
f. Click Edit to configure the security profile settings. The Edit Security Profile screen
displays:
Figure 69.
g. Specify the settings as explained in the following table:
Table 36. Point-to-point bridge profile and authentication settings
Setting
Profile Definition
Profile Name
Remote MAC Address Enter the MAC address of the remote wireless access point (the MAC address
Authentication Settings
Network
Authentication and
Data Encryption
Description
Enter a profile name that is easy to remember. The default name is
NETGEAR-WDS-1.
of AP2 on LAN Segment 1 in
From the Network Authentication drop-down list, select Open System,
WPA-PSK, or WPA2-PSK. Your selection determines the options that the Data
Encryption drop-down list provides, and whether the WPA Passphrase
(Network Key) field displays.
Advanced Configuration
121
Figure 67 on page 120).