NETGEAR ProSafe Premium WNDAP660 Reference Manual page 131

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
5. Verify the following for all wireless access points:
• All APs are on the same LAN, that is, the LAN IP addresses of all APs are in the same
network as the LAN devices.
• If you use DHCP, all wireless access points can obtain IP addresses automatically (as
DHCP clients). For more information, see
page 27 or Configure the Optional DHCPv6 Server
• All wireless access points use the same channel, authentication mode, and security
settings.
6. Verify connectivity across the LANs:
A computer on any LAN segment should be able to connect to the Internet or share files
and printers with any other devices or servers connected to any of the two LAN
segments.
Note: You can extend repetition of the wireless signal by adding up to two
more wireless access points that are configured in
point-to-multipoint bridge mode without client association. Also, you
can extend the range of the wireless network with NETGEAR
wireless antenna accessories.
Configure the Optional DHCPv4 Server
Advanced Configuration
131
on page 101.
on