NETGEAR ProSafe Premium WNDAP660 Reference Manual page 148

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
| | |-smtp-server-authentication
| | |-username
| | |-password
| | |-send-notifications
| |
| |-interface>
| | |-wlan>
| | | |-2.4GHz>
| | | | |-aggregation-length
| | | | |-ampdu
| | | | |-beacon-interval
| | | | |-channel
| | | | |-channelwidth
| | | | |-dtim-interval
| | | | |-fragmentation-length
| | | | |-guardinterval
| | | | |-knownap-add
| | | | |-knownap-del
| | | | |-macacl-add
| | | | |-macacl-database
| | | | |-macacl-del
| | | | |-mcsrate
| | | | |-mode
| | | | |-operation-mode
| | | | |-power
| | | | |-preamble
| | | | |-radio
| | | | |-rate
| | | | |-rifs-transmission
| | | | |
| | | | |-rogue-ap-detection
| | | | |-rts-threshold
| | | | |-11dSupport
| | | | |-client-isolation
| | | | |-create-qos-policy
| | | | |-create-qos-classification
| | | | |-delete-qos-policy
| | | | |-delete-qos-classification
| | | | |
| | | | |-security-profile>
| | | | | |-1>
| | | | | | |-authentication
| | | | | | |-encryption
| | | | | | |-hide-network-name
| | | | | | |-key1
| | | | | | |-key2
| | | | | | |-key3
| | | | | | |-key4
| | | | | | |-keyno
| | | | | | |-name
| | | | | | |-presharedkey
| | | | | | |-security-separation
--SMTP server status
--Username of the Administrator/superuser
--Password of the Administrator/superuser
--Administrator/superuser mail address
--Select wireless lan interface
--Wireless LAN interface setting
--2.4 GHz wireless LAN interface setting
--Aggregated packet size
--Aggregated MAC Protocol Data Unit
--Wireless beacon period in TU(1024 us)
--Wireless channel (depends on country and wireless mode)
--Wireless channel width
--Wireless DTIM period in beacon interval
--Wireless fragmentation threshold(even only)
--Interval (from interference from other transmissions)
--Add known access point
--Delete known access point
--Add wireless access control (ACL)
--Delete wireless access control (ACL) database
--Delete wireless access control (ACL)
--Transmit data rate
--Enable wireless access control (ACL)
--Wireless operation mode
--Wireless transmit power
--Wireless preamble (only effect on 802.11b rates)
--Enable wireless radio
--Wireless transmission date rate
--Enable successive frame transmission at different transmit
powers
--Enable rogue access point detection
--Wireless RTS/CTS threshold
--IEEE802.11d status
--Client isolation status
--Create QoS (Quality of service) policy
--Create Qos (Quality of service) classification
--Delete QoS (Quality of service) policy
--Delete Qos (Quality of service) classification
--Create security profile
--1st security profile
--Wireless authentication type
--Data encryption
--Hide network name
--Wireless wep key 1
--Wireless wep key 2
--Wireless wep key 3
--Wireless wep key 4
--Key number
--Profile name
--Pre-shared key
--Disable associated wireless client communication
Command-Line Reference
148