NETGEAR ProSafe Premium WNDAP660 Reference Manual page 116

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Table 33. QoS classification settings (continued)
Setting Description
Match Frame 802.1P
Fields and Match
Classifications
(continued)
IP Protocol
Ether Type
Source MAC
Destination
MAC
From the Match Classifications drop-down list, select the CoS priority
value against which the information in the IP header needs to be
matched:
• Routine(0)
• Priority(1)
• Immediate(2)
• Flash(3)
• Flash Override(4)
• Critic/CCP(5)
• Inter Control(6)
• Network Control(7)
In the Match Classifications field, enter the IP protocol value against
which the information in the IP header needs to be matched. A list of
protocol values is available at
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml
In the Match Classifications field, enter the Ether type value against
which the information in the IP header needs to be matched. A list of
Ether type values is available at
http://standards.ieee.org/develop/regauth/ethertype/eth.txt.
In the Match Classifications field, select or enter the source MAC
address against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless client that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
drop-down list.
2. From the drop-down list, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
drop-down list.
2. In the field to the right of the radio button, enter a MAC address.
In the Match Classifications field, select or enter the destination MAC
address against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless client that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
drop-down list.
2. From the drop-down list, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
drop-down list.
2. In the field to the right of the radio button, enter a MAC address.
Advanced Configuration
116
.