NETGEAR ProSafe Premium WNDAP660 Reference Manual page 88

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
The following table explains the fields of the Unknown AP List screen:
Table 22. Unknown AP List fields
Setting
MAC Address
SSID
Privacy
Channel
Rate
Beacon Int.
# of Beacons
Last Beacon
3. Click Save to export the list of unknown or known APs to a file. A window opens so you can
browse to the location where you want to save the file. The default file name is macList.txt.
If you wish, you can now import the saved list into the Known AP List on the Rogue AP
screen (see Enable and Configure Rogue AP Detection

To view the Known AP Lists and save it to a file:
1. Select Monitoring > Rogue AP > Known AP List. The Known AP List screen displays:
Figure 53.
2. Click Refresh to let the wireless access point discover the access points and populate the
Known AP List for the configured wireless modes.
Description
The MAC address of the unknown AP.
The SSID that the unknown AP is using.
Indicates whether security is enabled (1 means enabled; 0 means
disabled).
The channel that the unknown AP is using.
The transmit data rate in Mbps of the unknown the AP.
The interval for each beacon transmission in ms.
The number of beacons transmitted by the unknown AP that the wireless
access point has detected.
The time stamp that indicates the time when the most recent beacon was
detected.
Management and Monitoring
88
on page 85).