Bottom Panel With Product Label; Register The Wireless Access Point - NETGEAR ProSafe Premium WNDAP660 Reference Manual

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
8. Power socket for a 12 VDC, 1.5A power adapter.
9. Third reverse SMA connector for an optional 2.4 GHz antenna.
Note: The wireless access point can support up to three optional 2.4 GHz
antennas.

Bottom Panel with Product Label

The product label on the bottom of the wireless access point's enclosure displays factory
default settings, regulatory compliance, and other information:
Figure 3.

Register the Wireless Access Point

To qualify for product updates and product warranty, NETGEAR encourages you to register
your product. The first time that you connect to the wireless access point while it is connected
to the Internet, you have the option to register your product. At any time, you can register
your product from the web management interface, or you can go to the NETGEAR website
for registration at https://my.netgear.com/registration/login.aspx.

To register the wireless access point with NETGEAR:
1. Select Support > Registration. The Product Registration screen displays:
Introduction
14