Triggers > Action Triggers - Multitech SF100-G User Manual For System Administrators

Triggers > Action Triggers
Use this screen to set up trigger codes or words. Action Triggers are the codes or words sent from a remote
cell phone and received by the SMSFinder – the trigger will execute the action associated with it. This is a
setup screen; no messages are sent from this screen.
The trigger codes or words along with the authentication function may be configured for each trigger action. If
authentication is enabled, only the trigger code or word received from an authenticated user can trigger the
action.
Trigger Action – The following actions are executed when an initiating trigger code or word is detected from
an incoming SMS text message.
Trigger Message (Codes or Words)
Web Interface. These built-in codes can be changed. See the table on the next page for an explanation of
how the trigger codes and their associated trigger actions are created.
Authenticate – If the authenticate option is enabled, only the message received from the configured
authenticated user can trigger the action. The authenticated users are set up on the Triggers > Authentic
List screen.
Enable Authentication
To enable authentication click Edit. The Authenticate column then displays a check box, and the
View/Edit column displays the words Save and Cancel.
Click the check box to enable Authentication for this action and then click Save. If you want to disable
Authentication for this action, simply click Cancel.
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B)
Chapter 4 – Using the SMSFinder's Web Interface
– The trigger codes or words shown on this screen are built in to the
Triggers > Action Triggers
42