TalkAnytime Quick Start Instructions
Placement
Mount your TalkAnytime unit in a safe and convenient location where cables for your network and phone
system are accessible. Rack-mounting instructions are in Chapter 3: Mechanical Installation & Cabling of the
User Guide.
Command/Control Computer Setup (Specs & Settings)
The computer used for command and control of the TalkAnytime
(a) must be an IBM-compatible PC,
(b) must use a Microsoft operating system,
(c) must be connected to your local network (Ethernet) system, and
(d) must have an available serial COM port.
The configuration tasks and control tasks the PC will have to do with the TalkAnytime are not especially
demanding. Still, we recommend using a reasonably new computer. The computer that you use to
configure your TalkAnytime need not be dedicated to the TalkAnytime after installation is complete.
COM port on controller PC. You'll need an available COM port on the controller PC. You'll need to know
which COM port is available for use with the TalkAnytime (COM1, COM2, etc.).
Multi-Tech Systems, Inc.
TalkAnyTime User Guide
Placement
19