Fujitsu SPARC Enterprise M4000 Reference Manual page 55

NAME deleteboard - disconnect an eXtended System Board (XSB) from the domain
configuration
SYNOPSIS deleteboard [ [-q] -{y|n}] [-f] [-v] [-c disconnect] xsb [ xsb...]
deleteboard [ [-q] -{y|n}] [-f] [-v] -c unassign xsb [ xsb...]
deleteboard [ [-q] -{y|n}] [-f] [-v] -c reserve xsb [ xsb...]
deleteboard -h
DESCRIPTION The deleteboard(8) command disconnects an XSB from the domain configuration
in which it has been configured.
One of the following disconnection methods can be specified:
disconnect
unassign
reserve
You must have one of the following privileges to run this command:
Privileges
platadm
domainadm
Refer to setprivileges(8) for more information.
Disconnects the XSB from the domain configuration but keeps it
assigned. Because the XSB thus remains assigned to the domain
configuration, it can be configured again in the domain by
reboot the domain or execution of the addboard(8) command.
Completely disconnects the XSB from the main configuration
and puts it in the system board pool. The XSB in the system
board pool can be incorporated into or assigned to other domain
configurations.
Does not immediately disconnects the XSB from the domain
configuration but only reserves detachment. When the domain
power is shut down, the reserved XSB is disconnected from the
domain configuration and put in the system board pool.
Can run this command for all domains.
Can run this command only for your managed domains.
System Administration
deleteboard(8)
39