Fujitsu SPARC Enterprise M4000 Reference Manual page 351

Error status
Status:
Either of the following is displayed:
Warning
Alarm
Suspected faulty unit
FRU:
The suspected faulty units that are displayed and delimited by a
comma (,) are the units most likely and second most likely to be
faulty. If there are three suspected faulty units, asterisk (*) is
displayed next to the unit third most likely to be faulty. Display
of more than two suspected faulty units depends on whether
more than two suspected faulty units are detected.
Error description
Msg:
Detailed error code
Diagnostic
Code:
The displayed code is a hexadecimal number.
Abbreviation for Universal Unique Identifier
UUID:
This is a globally unique ID that is a 32-digit hexadecimal
number.
Unique message ID
MSG-ID:
Detailed message
Diagnostic
Messages:
If the log has a detailed message, it is displayed.
Scan log code
Detail log:
This code is displayed when the log includes a scan log.
Address: Displayed in hexadecimal notation.
Power log
■
Date
Mar 30 17:25:31 JST 2005
Mar 30 17:35:31 JST 2005
Mar 30 17:45:31 JST 2005
Mar 30 17:50:31 JST 2005
:
:
System Administration
Partial degradation of the unit or warning
about the FRU
FRU failure or error
Event Cause
System Power Off Power Failure
System Power On AC Restored
Domain Power On Panel
Domain Power Off Operator
showlogs(8)
DID Switch
-- Service
-- Locked
00 Locked
10 Service
413