Fujitsu SPARC Enterprise M4000 Reference Manual page 327
Xscf control package (xcp) 106x
Hide thumbs
Also See for SPARC Enterprise M4000:
- User manual (376 pages) ,
- Service manual (308 pages) ,
- Features manual (148 pages)
Table of Contents
Advertisement
NAME
showfru - display the hardware settings of specified device
SYNOPSIS
showfru device location
showfru -a device
showfru -h
DESCRIPTION
The showfru(8) command displays the hardware settings of specified device by the
setupfru(8) command.
The command can display the settings of the specified device or of all devices.
Only the physical system board (PSB) can be specified as a device.
The following settings are displayed:
Device
Location
XSB Mode
Memory Mirror
Mode
You must have platadm or fieldeng privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported.
-a
-h
Specified device name. Only sb is displayed.
Device location. If the device is 'sb', the indicated location is an
integer ranging from 00 to 15.
XSB mode set for the PSB. One of the following values is
displayed:
Uni-XSB
Uni
Quad-XSB
Quad
Memory mirror mode set for the PSB. One of the following
values is displayed:
Memory mirror mode
yes
Memory no-mirror modeB
no
Displays the settings of all devices.
Displays usage statement. When used with other options or
operands, an error occurs.
System Administration
showfru(8)
383
Advertisement
Table of Contents
