Fujitsu SPARC Enterprise M4000 Reference Manual page 223

user
EXAMPLES
EXAMPLE 1
XSCF>
EXAMPLE 2
XSCF>
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setpasswordpolicy(8), showuser(8)
The following are valid values for privileges:
Can configure auditing. Can delete audit trail.
auditadm
Can view all audit state and audit trail.
auditop
Can perform all operations reserved for field engineers
fieldeng
and authorized service personnel.
Cannot perform any operations on the Service
none
Processor that require privilege, even if privileges are
set for the user in LDAP. This privilege allows the
administrator to restrict access to such operations on
the Service Processor and domains.
Can perform all Service Processor configuration other
platadm
than the useradm and auditadm tasks. Can assign and
unassign hardware from domains, perform domain and
XSCF power operations and all operations on domain
hardware (assign, unassign, power, and so on). Can
perform Service Processor failover operations and view
all platform states.
Can view all platform states but not perform any
platop
modifications.
Can create, delete, disable, or enable user accounts. Can
useradm
change a user's password and password properties (for
example, expiry). Can modify a user's privileges.
Specifies a valid user name.
Setting Privileges for JSmith
setprivileges jsmith platadm domainadm@1–4,6,9
Removing All Privileges for JSmith
setprivileges jsmith none
Successful completion.
An error occurred.
System Administration
setprivileges(8)
243