Fujitsu SPARC Enterprise M4000 Reference Manual page 282

showboards(8)
318
Power status of the XSB
Pwr
n
y
Status of the XSB connection to the domain configuration
Conn
n
y
Incorporation state of XSB hardware resources into the operating
Conf
system
n
y
Status of an initial diagnosis on an XSB
Test
Unmount
Unknown
Testing
Passed
Failed
XSB degradation status
Fault
Normal
Degraded
Faulted
When the -v option is specified, the following types of information are displayed
as XSB detail status information:
Dynamic reconfiguration(DR) involving the reservation state of
R
the XSB in the domain
*
Whether the XSB is a COD board
Cod
n
y
XSCF Reference Manual • Last Revised January 2007
Power is off.
Power is on.
The XSB is not connected to the domain, or
it is located in the system board pool.
The XSB is connected to the domain.
The resources are not connected to the
operating system.
The resources are incorporated in the
operating system.
The XSB cannot be recognized because it is
not mounted or because it has an error.
Not performed.
The initial diagnosis is in progress.
The initial diagnosis ended normally.
Error (test=fail) detected by an initial
diagnosis. The XSB cannot be used or is in a
degraded state.
Normal
Component in a degraded state. The XSB
can operate.
An error occurred and the XSB cannot
operate.
DR processing is reserved. When the
domain is rebooted, the XSB is incorporated
into or disconnected from the domain, and
the domain configuration is changed.
The XSB is not a COD board.
The XSB is a COD board.