Fujitsu SPARC Enterprise M4000 Reference Manual page 363

NAME shownameserver - display the registered domain name system (DNS) servers
specified on the XSCF network
SYNOPSIS shownameserver
shownameserver -h
DESCRIPTION shownameserver(8) command displays the registered DNS servers in the XSCF
network.
You must have one of the following privileges to run this command:
Privileges
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
-h
The setnameserver(8) command sets the DNS servers used in the XSCF network.
EXTENDED
DESCRIPTION
EXAMPLES
EXAMPLE 1
EXAMPLE 2
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO setnameserver(8)
Displays usage statement.
Displays the DNS servers currently set for the XSCF network. The follow-
ing example shows that three DNS servers have been set:
shownameserver
XSCF>
nameserver 192.168.1.2
nameserver 10.18.108.10
nameserver 10.24.1.2
Displays the DNS servers currently set for the XSCF network. The follow-
ing example shows that no DNS server is set:
shownameserver
XSCF>
---
Successful completion.
An error occurred.
System Administration
shownameserver(8)
427