showdcl(8)
OPTIONS
EXTENDED
DESCRIPTION
EXAMPLES
280
The following options are supported:.
Displays information that is set for all domains.
-a
-d domain_id
Specifies the ID of the domain for which information is to be
displayed. The domain_id can be 0–23 depending on the system
configuration.
Displays usage statement. When used with other options or
-h
operands, an error occurs.
-l lsb
Specifies the LSB number whose information is to be displayed.
Specify an lsb value by using an integer ranging from 0 to 15.
Multiple locations can be specified by delimiting them with
spaces. If lsb is omitted, all the LSBs in the domain are targets.
Also displays information on Cfg-policy, No-Mem, No-IO, and
-v
Float in the DCL.
A system board for which the floating board priority is set to a low value is
■
difficult to use as a floating board. Accordingly, it is difficult for the system
board to affect the domain operation system.
The setdcl(8) command sets domain configuration information.
■
Displays detailed information on the DCL that is set for domain ID 0
EXAMPLE 1
showdcl -d 0
XSCF>
DID
LSB
XSB
00
00
00-0
04
01-0
08
02-0
12
03-0
XSCF Reference Manual • Last Revised November 2007
Status
Running