Fujitsu SPARC Enterprise M4000 Reference Manual page 348

showlogs(8)
410
-T time Specifies the end date and time of the display range for log data.
It is specified in one of the following formats:
yyyy-mm-dd,hh:mm
mm/dd/yy,hh:mm
Monddhh:mmyyyy
yyyy-mm-dd,hh:mm:ss
mm/dd/yy,hh:mm:ss
Monddhh:mm:ssyyyy
Even if the -r option is specified together with this option, the
specified -t and -T options are not reversed. The -T option
cannot be used for the monitoring message log.
Displays a log in detail. Details of Diagnostic Codes UUID
-v
and MSG-ID, which are used by the fmadm(8) and fmdump(8)
commands, are also displayed in addition to the items normally
displayed. This option cannot be specified together with the -S
or -V option. This option can be specified for an error log or
event log.
Displays a log in greater detail. If detailed log information on
-V
machine administration and OBP console log information have
already been collected, they are also displayed in addition to the
information displayed by the -v option. This option cannot be
specified together with the -S or the -v option. This option can
be specified for an error log.
XSCF Reference Manual • Last Revised January 2007
The timestamp is specified in the 'year-month-day, hour:minute'
format.
The timestamp is specified in the 'month/day/year, hour:minute'
format.
The timestamp is specified in the 'month-name, day, hour:minute,
year' format.
The timestamp is specified in the 'year-month-day,
hour:minute:second' format.
The timestamp is specified in the 'month/day/year,
hour:minute:second' format.
The timestamp is specified in the 'month-name, day,
hour:minute:second, year' format.