sethostname(8)
EXTENDED
DESCRIPTION
EXAMPLES
EXIT STATUS
SEE ALSO
198
To reflect the host name and the DNS domain name to XSCF, execute the
■
applynetwork(8) command. After reflected the information, use the
rebootxscf(8) command to reset XSCF to complete the setting.
To enable the set host name and DNS domain name, execute the
■
applynetwork(8) command and reset the XSCF.
The currently set host name and DNS domain name of the XSCF unit can be
■
checked by using the shownetwork(8) command.
Sets the host name scf0-hostname for XSCF unit 0.
EXAMPLE 1
sethostname xscf#0 scf0-hostname
XSCF>
Sets the DNS domain name example.com for XSCF unit.
EXAMPLE 2
sethostname -d example.com
XSCF>
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
applynetwork(8), rebootxscf(8), showhostname(8)
XSCF Reference Manual • Last Revised June 2007