Fujitsu SPARC Enterprise M4000 Reference Manual page 201

NAME setlookup - enable or disable the use of the Lightweight Directory Access Protocol
(LDAP) server for authentication and privilege lookup
SYNOPSIS setlookup -a {local|ldap}
setlookup -p {local|ldap}
setlookup -h
setlookup(8) sets whether authentication and privileges data are looked up in
DESCRIPTION
LDAP or not.
You must have useradm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-a
-h
-p
OPERANDS The following operands are supported:
ldap
local
EXAMPLES
EXAMPLE 1
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO showlookup(8)
Used with the -a and -p options. When set to ldap,
authentication or privileges are first looked up locally and then
in LDAP if not found locally.
Used with the -a and -p options. When set to local,
authentication or privileges are looked up only locally.
Enabling LDAP Lookup of Privilege Data
setlookup -p ldap
XSCF>
Successful completion.
An error occurred.
System Administration
Sets the authentication lookup. Used with one of the
required operands ldap or local.
Displays usage statement.
When used with other options or operands, an error
occurs.
Sets privileges lookup. Used with one of the required
operands ldap or local.
setlookup(8)
217