Showaudit; Showautologout; Showboards; Showcod - Fujitsu SPARC Enterprise M4000 Reference Manual

showaudit

showautologout

showboards

showcod

showcodlicense

showcodusage
showconsolepath
showdate
showdcl
showdevices
showdomainmode
showdomainstatus
showdscp
showdualpowerfeed display the current setting of dual power feed mode
showemailreport
showenvironment
showfru
showhardconf
showhostname
showhttps
showldap
showlocale
showlocator
System Administration
display the current auditing system state
display the session timeout time of the XSCF shell
display information on an eXtended System Board (XSB)
display Capacity on Demand (COD) configuration
information
display the current Capacity on Demand (COD) right-to-
use (RTU) licenses stored in the COD license database
display the current usage statistics for Capacity on Demand
(COD) resources
display information on the domain console that is currently
connected
show the date and time of XSCF
display the current domain component list (DCL)
display current information on an eXtended System Board
(XSB)
display the domain mode
display the current domain component list (DCL)
display the IP addresses assigned to the Domain to Service
Processor Communications Protocol (DSCP)
display the email report configuration data
display the intake air temperature and humidity,
temperature sensor information, voltage sensor
information, and fan rotation information about the system
display the hardware settings of specified device
display information about field replaceable unit (FRU)
installed in the system
display the current host name for the XSCF unit
display the status of the HTTPS service set for the XSCF
network
display the Lightweight Directory Access Protocol (LDAP)
configuration for the Service Processor
display the current setting for the XSCF locale
display the state of the CHECK LED on the operator panel
Intro(8)
5