Fujitsu SPARC Enterprise M4000 Reference Manual page 213

XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
EXAMPLE 2
XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
EXAMPLE 3
XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
EXAMPLE 4
XSCF>
Please reset the XSCF by rebootxscf to apply the ntp settings.
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO rebootxscf(8), showntp(8)
and 10.24.1.2.
setntp 192.168.1.2 10.18.108.10 10.24.1.2
Deletes the NTP server 10.18.108.10.
setntp -c del 10.18.108.10
Adds the two NTP servers ntp1.examples.com and ntp2.example.com.
setntp ntp1.example.com ntp2.example.com
Sets the stratum value to 7, when you regard XSCF as an NTP server.
setntp -c stratum -i 7
Successful completion.
An error occurred.
System Administration
setntp(8)
189