Fujitsu SPARC Enterprise M4000 Reference Manual page 369

XSCF>
xscf#0-lan#0
xscf#0-lan#1
xscf#0-if
xscf#1-lan#0
xscf#1-lan#1
xscf#1-if
XSCF>
EXIT STATUS The following exit values are returned:
0
>0
SEE ALSO applynetwork(8), setnetwork(8)
server.
shownetwork -a
Link encap:Ethernet
inet addr: 192.168.11.10
UP BROADCAST RUNNING MULTICAST
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12241827 (11.3 MiB)
Base address:0x1000
Link encap:Ethernet
inet addr:192.168.10.11
UP BROADCAST RUNNING MULTICAST
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:20241827 (19.3 MiB)
Base address:0x1000
Link encap:Ethernet
inet addr:192.168.10.128
UP BROADCAST RUNNING MULTICAST
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)
Base address:0x1000
HWaddr 00:00:00:12:34:59
inet addr:192.168.10.12
HWaddr 00:00:00:12:34:60
HWaddr 00:00:00:12:34:61
Successful completion.
An error occurred.
System Administration
HWaddr 00:00:00:12:34:56
Bcast: 192.168.11.255
MTU:1500
TX bytes:1189769 (0.9 MiB)
HWaddr 00:00:00:12:34:57
Bcast: 192.168.10.255
MTU:1500
TX bytes:2089769 (1.9 MiB)
HWaddr 00:00:00:00:00:00
Bcast:192.168.10.255
MTU:1500
TX bytes:17010 (16.6 KiB)
Mask:255.255.255.0
shownetwork(8)
Mask:255.255.255.0
Metric:1
Mask:255.255.255.0
Metric:1
Mask: 255.255.255.0
Metric:1
433