Fujitsu SPARC Enterprise M4000 Reference Manual page 420

switchscf(8)
EXTENDED
DESCRIPTION
EXAMPLES
EXIT STATUS
388
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n" to
cancel the command.
Switches the state of the XSCF unit that the user is currently logged in to,
EXAMPLE 1
to standby.
switchscf -t Standby
XSCF>
The XSCF unit switch between the Active and Standby states. Continue? [y|n]:
Switches the state of the XSCF unit that the user is currently logged in to,
EXAMPLE 2
to standby.
switchscf -t Standby -y
XSCF>
The XSCF unit switch between the Active and Standby states. Continue? [y|n]:y
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
XSCF Reference Manual • Last Revised November 2007
Automatically answers ' ' to all prompts.
y
y