Setldap; Setlocale; Setlocator; Setlookup - Fujitsu SPARC Enterprise M4000 Reference Manual

Intro(8)
4

setldap

setlocale

setlocator

setlookup

setnameserver

setnetwork
setntp
setpasswordpolicy manage the system password policy
setpowerupdelay
setprivileges
setroute
setshutdowndelay
setsmtp
setsnmp
setsnmpusm
setsnmpvacm
setssh
settelnet
settimezone
setupfru
setupplatform
showaltitude
showarchiving
XSCF Reference Manual • Last Revised June 2006
configure the Service Processor as a Lightweight Directory
Access Protocol (LDAP) client
sets the default locale of the XSCF
control the blinking of the CHECK LED on the operator
panel
enable or disable the use of the Lightweight Directory
Access Protocol (LDAP) server for authentication and
privilege lookup
set the domain name system (DNS) servers used in the
XSCF network
configure a network interface using by XSCF
set the NTP servers used in the XSCF network
set the warm-up time of the system and wait time before
system startup
assign user privileges
set routing information for an XSCF network interface
set the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
set up the SMTP settings
manage the SNMP agent
specify the SNMPv3 agent's User-based Security Model
(USM) configuration
modify the SNMPv3 agent's View-based Access Control
Model (VACM) configuration
set the SSH service used in the XSCF network. Also,
generate the host public key, and register or delete the user
public key, which are necessary for the SSH service
start or stop the telnet service used in the XSCF network
set the time zone and Daylight Saving Time of XSCF
set up device hardware
set up platform specific settings
display the altitude state of the system
display log archiving configuration and status