Fujitsu SPARC Enterprise M4000 Reference Manual page 238
Xscf control package (xcp) 106x
Hide thumbs
Also See for SPARC Enterprise M4000:
- User manual (376 pages) ,
- Service manual (308 pages) ,
- Features manual (148 pages)
Table of Contents
Advertisement
setsnmp(8)
260
When used alone, stops the SNMP agent.
disable
When used with the value ALL for the optional mib_name, stops
the SNMP agent.
When used with a value other than ALL for the optional
mib_name, removes support for the targeted MIB module. If
support remains for another MIB module, the SNMP agent
remains enabled. If support for both MIB modules is removed,
the SNMP agent is disabled and, therefore, stops. You can
specify only one value at a time for mib_name.
mib_name
Valid MIB modules are:
SP_MIB = OPL-SP-MIB
FM_MIB = SUN-FM-MIB
ALL = All the MIB modules in this list.
disablev1v2c Disables the SNMP agent from communicating using SNMPv1/
v2c. These versions provide insecure SNMP communication.
When used alone, activates the SNMP agent with support for all
enable
MIB modules.
When used with the value ALL for the optional mib_name,
activates the SNMP agent with support for all MIB modules.
When used with a value other than ALL for the optional
mib_name, adds support for the targeted MIB module and, if
necessary, activates the SNMP agent. You can specify only one
value at a time for mib_name.
mib_name
Valid MIB modules are:
SP_MIB = OPL-SP-MIB
FM_MIB = SUN-FM-MIB
ALL = All the MIB modules in this list.
Enables the SNMP agent to communicate using SNMPv1/v2c.
enablev1v2c
These versions provide insecure SNMP communication, which is
why the agent runs SNMPv3 by default. This agent is read-only.
The only community string asked for is read-only.
XSCF Reference Manual • Last Revised January 2007
Name of the MIB module to be disabled.
Name of the MIB module to be enabled.
Advertisement
Table of Contents
