Fujitsu SPARC Enterprise M4000 Reference Manual page 328

showfru(8)
OPERANDS
EXTENDED
DESCRIPTION
EXAMPLES
EXIT STATUS
SEE ALSO
384
The following operands are supported:
device Specifies the device to display. Currently, only the following
device can be specified:
sb
location Specifies the location of device. If the device is 'sb', an integer
ranging from 00 to 15 can be specified.
The setupfru(8) command makes hardware settings for a device.
Displays the settings of all PSBs.
EXAMPLE 1
showfru -a sb
XSCF>
Device Location
sb 00
sb 01
sb 02
sb 03
The following exit values are returned:
Successful completion.
0
An error occurred.
>0
addboard(8), deleteboard(8), moveboard(8), setdcl(8), setupfru(8),
showboards(8), showdcl(8), showdevices(8)
XSCF Reference Manual • Last Revised January 2007
Physical system board (PSB)
XSB Mode Memory Mirror Mode
Quad no
Uni yes
Quad no
Uni no