Fujitsu SPARC Enterprise M4000 Reference Manual page 143

setarchiving(8)
NAME setarchiving - configure the log archiving functionality
SYNOPSIS setarchiving [-k host-key] [-l audit-limit,non-audit-limit] [-p password|-r] [-t
user@host:directory] [-v] [-y|-n]
setarchiving enable|disable
setarchiving -h
setarchiving(8) manages the log archiving configuration. Persistent storage
DESCRIPTION
space on the Service Processor is limited. Some logs may grow to the point where
old log entries must be overwritten or deleted. Log archiving allows the user to set
up the Service Processor to automatically archive its log data on a remote host.
Note – You must set up the archive host correctly prior to enabling the log
archiving feature. (See .) If you attempt to enable archiving while the
EXAMPLE 1
configuration is invalid (for example, if the specified archive host does not exist),
setarchiving exits with an error message. setarchiving exits with an error
message if you request invalid configuration changes while archiving is enabled.
Note – setarchiving(8) requires at least one option or operand.
You must have platadm privileges to run this command.
Privileges
Refer to setprivileges(8) for more information.
System Administration
145